1084A22 ENGINE OIL FILLER - R R - Alfa - 147 - eLearn

3025096 - 1084A22 engine oil filler - r r

) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal - 1016A10 sound-proofing cover - r + r . 1. Loosen the band and disconnect the engine oil vapour recovery pipe from the engine oil filler. 2. Disconnect the electrical connection from the engine coolant temperature sensor.

	Name	Connector
2	Engine temperature sender unit	K36

1. Undo the bolts (1a) and remove the engine oil filler (1b). 2. Remove the gasket.

Refitting ( Removing

) 1. Place the engine oil filler (1a), complete with gasket (1b), back in its housing and secure it tightening the bolts (1c) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1c	Bolt	CYLINDER HEAD EXTENSION	M8	(Cylinder head side 23 28

Connect the electrical connection to the engine coolant temperature sensor. Connect the oil vapour recovery pipe to the engine oil filler and tighten the band. Proceed with refitting - 1016A10 sound-proofing cover - r + r .Connect the negative (-) battery terminal.