1060G80 DS ELECTRIC INJECTION CONTROL UNIT - R R - Alfa - 147 - eLearn

3025054 - 1060G80 ds electric injection control unit - r r

) Proceed with removal - 7025A12 Engine front sound insulation COVER - R.R. .Proceed with removal - 7025A14 Bonnet LID - R.R. .Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

1. Remove the engine oil filler cap.2. Undo the fixing bolts (2a) and remove soundproofing cover (2b).Tighten the engine oil filler cap.

1. Disconnect the electrical connections (1a) and (1b) from the diesel electronic injection system control unit.

	Name	Connector
1a	Engine management ECU	M10A

	Name	Connector
1b	Engine management ECU	M10B

1. Undo the nuts (1a) and remove the diesel electronic injection system control unit (1b) complete with slides (1c).

Refitting ( Removing

) Place the diesel electronic injection control unit complete with slides back in its housing with its bracket and secure it using the nuts.Connect the electrical connections to the diesel electronic injection control unit.Remove the engine oil filler cap.Place the soundproof cover back in its housing and secure using the relevant bolts.Tighten the engine oil filler cap.Connect the negative (-) battery terminal.Proceed with refitting - 7025A14 Bonnet LID - R.R. .Proceed with refitting - 7025A12 Engine front sound insulation COVER - R.R. .