P10 CENTRAL LOCKING / NOT WORKING - Alfa - 147 - eLearn

When the central door locking is operated with the key or remote control (if present), the doors do not open and do not close

1	FUSE CHECK	All OK	Problems met	Operation
		Results of the tests
	Check condition of fuses: See E3040 CENTRAL LOCKING	Continue to Step 2	Fuse blown	Replace the fuse (then search for the cause of the problem)
2	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Verify: That there are no faults in the Body Computer Plausibility of parameters	Continue to Step 3	Error detected in Body Computer	Continue according to the instructions for the diagnostic equipment
		Continue to Step 3	Incoherent parameters	Continue according to the instructions for the diagnostic equipment
3	ACTIVE DIAGNOSIS WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Carry out active diagnosis of central door locking	Continue to Step 4	Central door locking not working	Replace the Body Computer Op. 5505A32
4	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present		Fault persists	Search for the fault starting from another symptom'