3025002 - 1020A46 oil sump bulkhead - r r
Removing
(
Refitting
)
1. Undo and remove the engine oil level sensor.2. Remove the connector for the condensation oil return pipe to
the sump. 3. Undo the bolts (3a) and remove the crankcase oil sump partition
(3b). 
Refitting
(
Removing
)
Place the crankcase oil sump partition
back in its housing and secure it using the bolts. Place the connector for the condensation
oil return pipe to the sump back in its housing. Place the engine oil level sensor back
in its housing and tighten it to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | - | OIL LEVEL DIPSTICK SENSOR | M12 | (Crankcase sump side) 2.0 ÷ 3.0 |