3025694 - 7010A10 rear side door - adjust striker and adapt seal if necessary

Before altering the position of the door striker, ensure the door is properly aligned.  Refer to op.. 7010A14  rear side door - adjust centering and moulding - includes adaptation of hinges and seals on door compartment .1. Loosen the striker retaining screws.2. Use the bolt slots to move the striker into the correct position.
Fit shims if necessary in order to adjust the striker accurately. Permitted adjustment movements are indicated by arrows.
Tighten the bolts.

FasteningComponentØValue(daNm)
-BoltSTRIKER ON REAR SIDE DOOR PILLARM62.4
Check the striker and catch fit together properly and ensure the door is aligned when closed.