3025695 - 7010A14 rear side door - adjust centering and moulding - includes adaptation of hinges and seals on door compartment

1. Loosen the bolts.2. Adjust the door position, making use of the bolt slots, so that it is perfectly aligned with the body.

It is advisable to work on one hinge at a time. Fit shims between hinges and door pillar if necessary to ensure the door is adjusted properly Possible adjustment movements are indicated by arrows.

After adjustment, tighten the hinge retaining bolts.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR SIDE DOOR HINGES	M10	4.5

Remove the door ( Refer to op.. 7210E38  R.R. REAR SIDE DOOR )Touch up the paintwork in the hinge area.Refit the door ( Refer to op.. 7210E38  R.R. REAR SIDE DOOR )Make the door check strap come out and tighten its bolt.Check that the striker and catch fit together properly.If necessary,  Refer to op.. 7010A10  rear side door - adjust striker and adapt seal if necessary .