3025757 - 7025A34 bonnet lid lock (one) - r+r or repair

Removing ( Refitting ) Open the bonnet lid.1. Unscrew the nuts.2. Move the catch (2a) over slightly and disconnect the operating cable (2b) from the retainers (2c). Remove the catch.
Refitting ( Removing ) Check that the lock is undamaged.Connect the operating cable to the catch.Fit the lock.1. Screw in the nuts (1a) without tightening them and adjust the catch position. Arrows (1b) indicate possible movements.
Tighten the nut to the specified torque.

FasteningComponentØValue(daNm)
-NutBONNET LID LOCK/SM60.8
Check that the catch and control system are working.