3024783 - 1024B40 flywheel crown wheel - replacement for versions with manual gearbox
Removing
(
Refitting
)
Remove the ring gear from the engine flywheel
using a hydraulic press.
Refitting
(
Removing
)
Thoroughly clean and degrease the contact
surfaces of the new ring gear and the flywheel.Heat up the new ring gear evenly in an
oven at a temperature of 80° C.Fit the ring gear on the flywheel. | The bevel on the inner diameter of the ring gear must face the flywheel. |
| Leave to cool to ambient temperature without cooling forcibly. |