3025041 - 1060G14 engine coolant temperature sensor - r r

Removing ( Refitting ) Proceed with removal  - 7025A12  Engine front sound insulation COVER - R.R. .Proceed with removal  - 7025A14  Bonnet LID - R.R. .Proceed with removal  - 1016A10  sound-proofing cover - r + r .Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connection from the engine coolant temperature sensor.

	Name	Connector
1	Engine temperature sender unit	K36

2. Undo and remove the engine coolant temperature sensor. Refitting ( Removing ) Place the engine coolant temperature sensor back in its housing and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	-	-	-

Connect the electrical connection to the engine coolant temperature sensor.Connect the negative (-) battery terminal.Proceed with refitting  - 1016A10  sound-proofing cover - r + r .Proceed with refitting  - 7025A14  Bonnet LID - R.R. .Proceed with refitting  - 7025A12  Engine front sound insulation COVER - R.R. .