3024730 - 0010T65 hydraulic brake system bleed air

Position the vehicle on the ramp.Proceed with removal  Refer to op.. 7025A12  Engine front sound insulation COVER - R.R. .Proceed with removal  Refer to op.. 7025A14  Bonnet LID - R.R. .Proceed with removal  Refer to op.. 1016A10  sound-proofing cover - r + r .1. Connect the tool to the brake-clutch fluid reservoir.

NameCountry
1Brake/clutch bleeding equipment1.806.097.001
2. Remove the protective cap on the brake caliper bleed valve.3. Connect the collection system (pipe and reservoir) to the bleed valve on the brake caliper.4. Open the bleed valve on the brake caliper.5. Slowly open the fluid reservoir tap.Wait until all the air contained in the hydraulic system has emerged.Close the bleed valve on the brake caliper and fit the protective cap.Repeat the above operations for the other brake calipers.
Remove the collection system (pipe and reservoir).Remove the equipment.

NameCountry
-Brake/clutch bleeding equipment1.806.097.001
Proceed with refitting  Refer to op.. 1016A10  sound-proofing cover - r + r .Proceed with refitting  Refer to op.. 7025A14  Bonnet LID - R.R. .Proceed with refitting  Refer to op.. 7025A12  Engine front sound insulation COVER - R.R. .Remove the car from the ramps.