3024759 - 1008C10 power unit upper reaction link r r
Removing
(
Refitting
)
1. Release the fuel vapour recirculation pipe from the fastening
on the power assisted steering fluid reservoir.2. Undo the bolts (2a) and (2b) and remove the power unit reaction
rod (2c).
Refitting
(
Removing
)
Place the power unit reaction rod back
in its housing and secure it by tightening the bolts to the recommended
torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | REACTION ROD | M10 | (Bracket on engine/bracket on bodyshell side) 4.5 ÷ 5.5 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | REACTION ROD | M10 | (Bracket on engine/bracket on bodyshell side) 4.5 ÷ 5.5 |