3024776 - 1020D18 front crank shaft cover oil seal - replace
Removing
(
Refitting
)
Proceed with the removal - 4450B10 Front WHEEL (one) -
R.R. (Right side). Proceed with the removal - 7055B64 Engine compartment DUST
shield in front wheel arch (one), left or right - R.R. (Right
side). Proceed with the removal - 1092G10 single engine belt r
r . Proceed with the removal - 1092A10 Crankshaft services
PULLEY - R.R. . Proceed with the removal - 1092G20 engine component single
belt fixed tensioner - one - r + r . Proceed with the removal - 1032D12 timing system protective
cover(s) - r + r . Proceed with the removal - 1016A40 ignition coil cover
on cylinder head- r+r . Proceed with the removal - 5510C14 ignition coil/s - r+r . Proceed with the removal - 1016A20 single cam cover - r
+ r and replace gasket . Proceed with the removal - 1032B10 toothed timing belt
- r + r for timing adjustment or replacement . Proceed with the removal - 1032B46 toothed drive pulley
- r + r . 1. Remove the crankshaft front cover oil seal. | Take care not to damage the oil seal housing whilst removing it. |
Refitting
(
Removing
)
1. Refit a new front crankshaft front cover oil seal (1a) using
tool (1b). | Name | Country |
|---|---|---|
| 1b | Fitting tool | 1.821.247.000 |
