1072B10 INLET MANIFOLD - R + R AND REPLACE SEAL - Alfa - 147 - eLearn

) Ensure that the ignition key is in the OFF postition, then disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1B

Proceed with the removal - 1016A40 ignition coil cover on cylinder head- r+r . Proceed with the removal - 1056B60 single fuel manifold pipe, with injectors - r + r . Proceed with the removal - 1072B50 sleeves connecting air capacity box to inlet manifold is - r+r . 1. Undo the bolts (1a) and release the mounting bracket (1b) for the power assisted steering fluid reservoir from the intake manifold.

1. Undo the nuts (1a) and remove the inlet manifold (1b).Remove the gasket.

) Place the inlet manifold, complete with a new gasket, back in its housing and fix it tightening the nuts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	INLET MANIFOLD	M8	(Cylinder head side) 2.3 ÷ 2.8

Place the power assisted steering fluid reservoir mounting bracket back in its housing and secure it using the bolts.Proceed with the refitting - 1072B50 sleeves connecting air capacity box to inlet manifold is - r+r .Proceed with the refitting - 1056B60 single fuel manifold pipe, with injectors - r + r .Proceed with the refitting - 1016A40 ignition coil cover on cylinder head- r+r .Connect the battery terminal (-).