3024885 - 1080E20 active carbon filter for fuel vapours - r + r

Removing ( Refitting ) Position the vehicle on the ramp.Proceed with the removal  - 4450B10  Front WHEEL (one) - R.R. (Right side). Proceed with the removal  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side). Proceed with the removal  - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. (Right side). 1. Disconnect the rapid attachments for the fuel vapour recovery pipes and release these pipes from the fastenings. 1. Undo the nuts (1a) and remove the fuel vapour active charcoal filter (1b) complete with pipes (1c). Refitting ( Removing ) Place the fuel vapour active charcoal filter, complete with pipes, back in its housing and fasten it using the nuts.Connect the rapid attachment coupling for the fuel vapour recovery pipes and secure.Proceed with the refitting  - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. (Right side).Proceed with the refitting  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side).Proceed with the refitting  - 4450B10  Front WHEEL (one) - R.R. (Right side).Remove the car from the ramp.