3024889 - 1080E63 Fuel vapour PIPE from INTERMEDIATE COUPLING to fuel vapour SOLENOID VALVE - R.R.

Removing ( Refitting ) Ensure that the ignition key is in the OFF postition, then disconnect the battery negative terminal.

NameConnector
-Battery  A1B 
Proceed with the removal  - 1016A40  ignition coil cover on cylinder head- r+r . Proceed with the removal  - 1056B60  single fuel manifold pipe, with injectors - r + r . Proceed with the removal  - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r . 1. Undo the bolts fixing the fuel vapour pipe from the intermediate coupling to the solenoid valve to the air chamber.2. Release the fuel vapour pipe from the intermediate coupling to the solenoid valve from the fastening.3. Undo the bolts fixing the fuel vapour enabling solenoid valve to the ilet mounting bracket.4. Loosen the band (4a) and remove the fuel vapour pipe from the intermediate coupling to the solenoid valve (4b).
Refitting ( Removing ) Place the fuel vapour pipe from the intermediate coupling to the solenoid valve back in its housing and fasten it using the band.Tighten the bolts fixing the fuel vapour enabling solenoid valve to the inlet mounting bracket.Secure the fuel vapour pipe from the intermediate coupling to the solenoid valve to the fastening.Tighten the bolts fixing the fuel vapour pipe from the intermediate coupling to the solenoid valve to the air chamber.Proceed with the refitting  - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r .Proceed with the refitting  - 1056B60  single fuel manifold pipe, with injectors - r + r .Proceed with the refitting  - 1016A40  ignition coil cover on cylinder head- r+r .Connect the battery terminal (-).