3340B69 RHP BRAKE CONNECTION PIPE - R R - Alfa - 147 - eLearn

3025263 - 3340B69 rhp brake connection pipe - r r

) Position the vehicle on the ramp.Remove the handbrake boot.1. Lift up the handbrake lever (1a) and loosen the nut (1b) adjusting the tension of the handbrake cables.

Proceed with removal - 1076B22 rear exhaust silencer - r+r emission control versions .Proceed with removal - 1076B26 intermediate exhaust silencer - r+r emission control versions .

Refitting ( Removing

) 1. Refit in its seating the rigid pipe from connector to rear left brake. 2. Connect the rigid pipe from the connector to the left rear brake (2a), left rear brake side, and tighten the connector (2b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2b	Connector	RIGID PIPE FROM FITTING	M10	(Rear brake caliper flexible pipe side.) 1.4 ÷ 1.8

1. Connect the rigid pipe from the connector to the left rear brake (1a), connector side, and tighten the connector (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Connector	RIGID PIPE FROM FITTING	M10	(Connector side) 1.4 ÷ 1.8

2. Secure the rigid pipe from the connector to the left rear brake to the attachments on the underbody.

Refit in its seating the intermediate heat shield, and secure it with the bolt and clips.Secure the handbrake cable to the mounting bracket. Proceed with refitting - 1076B26 intermediate exhaust silencer - r+r emission control versions .Proceed with refitting - 1076B22 rear exhaust silencer - r+r emission control versions .