3025474 - 5050D10 headlamp washer jet/s - r+r with bumpers removed
Removing ( Refitting ) 1. Withdraw the pipe quick-release fitting by pulling it.2. Unscrew the nuts.3. Release all the moulding's retainers.4. Remove the moulding with headlamp washer jet.
1. Undo the bolts.2. Remove the headlamp washer jet from the moulding.
Refitting
(
Removing
)
Check that the headlamp washer
jet is not damaged.Fit the headlamp washer jet and fix it
with the bolts.Fit the moulding with headlamp washer jet
on the bumper and engage the retainers.Tighten the nuts.Engage the pipe quick-release fitting in
the headlamp washer jet.