1008A46 CAM SHAFT LEFT RIGID MOUNT - R R - Alfa - 147 - eLearn

3024753 - 1008A46 cam shaft left rigid mount - r r

) Position the vehicle on the ramp.Proceed with the removal - 4450B10 Front WHEEL (one) - R.R. (Right side). Proceed with the removal - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side). Position a hydraulic jack under the engine.1. Undo the nuts (1a) and (1b), then remove the timing side rigid engine support (1c).

Refitting ( Removing

) 1. Place the timing side rigid engine support (1a) back in its housing and secure it to the cylinder block/crankcase by tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	ENGINE MOUNT TIMING SIDE	M10	(Crankcase side) 4.5 ÷ 5.5

2. Tighten the bolt securing timing side rigid engine support to the flexible mounting to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	ENGINE MOUNT TIMING SIDE	M12	(Flexible mounting side) 7.9 ÷ 9.7

Remove the hydraulic jack from under the engine.Proceed with the refitting - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side).Proceed with the refitting - 4450B10 Front WHEEL (one) - R.R. (Right side).Remove the car from the ramp.