3024801 - 1032D12 timing system protective cover(s) - r + r
Removing ( Refitting ) Position the vehicle on the ramp.Proceed with the removal - 4450B10 Front WHEEL (one) - R.R. (Right side). Proceed with the removal - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side). Proceed with the removal - 1092G10 single engine belt r r . Proceed with the removal - 1092A10 Crankshaft services PULLEY - R.R. . Proceed with the removal - 1092G20 engine component single belt fixed tensioner - one - r + r . 1. Undo the lower bolts fixing the protective timing cover.
1. Undo the bolts (1a) and the nut (1b) and remove the auxiliary
units drive belt protection (1c).
1. Undo the remaining bolt (1a) and remove the protective timing
cover (1b).
Proceed with the removal - 1016A40 ignition coil cover
on cylinder head- r+r . 1. Undo the bolts (1a) and move the power assisted steering fluid
reservoir (1b) without disconnecting the pipes.
1. Undo the bolts (1a) and remove the protective timing covers (1b).
Refitting
(
Removing
)
Place the protective timing covers back
in their housings and secure them using the bolts.Refit in its seating the power steering
fluid reservoir and secure it with its bolts.Proceed with the refitting - 1016A40 ignition coil cover
on cylinder head- r+r .Place the protective timing cover back
in its housing and secure it using the upper bolt.Place the auxiliary units drive belt protection
back in its housing and secure it using the bolts and the nut.Tighten the lower bolts fixing the protective
timing cover.Proceed with the refitting - 1092G20 engine component single
belt fixed tensioner - one - r + r .Proceed with the refitting - 1092A10 Crankshaft services
PULLEY - R.R. .Proceed with the refitting - 1092G10 single engine belt r
r .Proceed with the refitting - 7055B64 Engine compartment DUST
shield in front wheel arch (one), left or right - R.R. (Right
side).Proceed with the refitting - 4450B10 Front WHEEL (one) -
R.R. (Right side).Remove the car from the ramp.