1088E80 RADIATOR COOLING FAN/S WIRING BUNDLE - R R OR REPLACE - Alfa - 147 - eLearn

3024916 - 1088E80 radiator cooling fan/s wiring bundle - r r or replace

) Open the bonnet lid.1. Release the retainers (1a) and remove the cover (1b).2. Disconnect the electrical connections.

	Name	Connector
2	Battery earth	C1

3. Open the wiring retaining duct.4. Move the earth wiring away from the duct.

1. Release the control unit (1a) from the two side retainers (1b).

1. Lift up the control unit slightly and disconnect the only electrical connection shown.

	Name	Connector
1	Engine compartment junction unit	B1E

1. Move the control unit.2. Remove the seal.3. Release the wiring from the control unit container.

1. Undo the nuts fixing the fan motor protection.2. Remove the protection.3. Release the safety retainer and disconnect the electrical connection.

	Name	Connector
3	Engine electric fan motor	N11

4. Disconnect the electrical connections for the resistor.

	Name	Connector
4	Engine fan adjustment resistor	O10

5. Disconnect the wiring from the retaining bands.6. Recover the wiring.

Refitting ( Removing

) Check that the fan is not damaged and that the individual wires are firmly attached to the connections.Check that the connections are fitted with the anti-slip devices (secondary lock).If necessary, check the continuity.Reposition the fan wiring and secure it to the retaining bands.Connect the electrical connections and the safety retainer.Position the fan motor protection and secure it using the nuts.Insert the wiring in the control unit container.Fit the seal.Connect the electrical connectionPosition the control unit and attach it to the side retainers.Position the earth wiring in the duct and closed it.Connect the electrical connectionClose the cover and attach the retainers.Check that the fan electrical system and the components involved are correctly fitted and working properly.