4410A12 FRONT SUSPENSION DAMPER (ONE), LH OR RH - FOR MCPHERSON STRUT SYSTEM - INCLUDES DISMANTLING/RE-BUILDING OF ASSEMBLY AT BENCH R R - Alfa - 147 - eLearn

3025316 - 4410A12 front suspension damper (one), lh or rh - for mcpherson strut system - includes dismantling/re-building of assembly at bench r r

Position the vehicle on the ramp.Proceed with the removal - 4450B10 Front WHEEL (one) - R.R. . Proceed with the removal - 4410A80 damper lower fork - r r . Proceed with the removal - 4410A10 l/h or r/h front suspension spring/damper unit (one) - r+r - check wheel geometry separately if necessary . 1. Fit the flanges (1a) on the tool (1b).

	Name	Country
1a	Flanges	1.870.662.000

	Name	Country
1b	Mount	1.820.089.000

1. Fit the spring/shock absorber assembly on the support tool and compress it.

The spring/shock absorber assembly must be fitted to the tool with the tab on the lower part of the shock absorber turned downward.

Use the top left and bottom right holes in the flange for the right shock absorber; Use the bottom left and top right holes in the flange for the left shock absorber;

1. Undo the nut (1a) for the upper shock absorber buffer using tools (1b) and (1c).

	Name	Country
1b	Key	1.870.663.000

	Name	Country
1c	Counter-torque	1.870.664.000

1. Loosen the compression tool and remove spring (1a), shock absorber (1b), upper plate (1c), and upper buffer (1d).

1. Fit the locating key on the tool and secure using the bolt.

1. Assemble the shock absorber-spring assembly components and fit the assembly to the compression tool, then compress.

The reference hole on the upper plate should be turned downward and the timing references on the shock absorber stem must be aligned with the locating key.

Remove the locating key.1. Tighten the nut (1a) for the shock absorber upper buffer to the recommended torque using tools (1b) and (1c).

	Fastening	Component	Ø	Value(daNm)
1a	Nut	FRONT DAMPER TOP ATTACHMENT	M12	(Upper buffer side) 3.0 ÷ 3.6

	Name	Country
1b	Key	1.870.663.000

	Name	Country
1c	Counter-torque	1.870.664.000

Loosen the compression tool and remove the spring/shock absorber assembly.Proceed with the refitting - 4410A10 l/h or r/h front suspension spring/damper unit (one) - r+r - check wheel geometry separately if necessary .Proceed with the refitting - 4410A80 damper lower fork - r r .Proceed with the refitting - 4450B10 Front WHEEL (one) - R.R. .Remove the car from the ramp.Proceed with the refitting - 4450A10 front wheel geometry - check using optical equipment - includes front wheel tow-in adjustment if necessary .