5510C26 RPM SENSOR - R+R - Alfa - 147 - eLearn

3025503 - 5510C26 rpm sensor - r+r

) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF postition, then disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1B

Proceed with the removal - 1072C44 exhaust manifold heat shield on bulkhead - r+r . Release the electrical wiring for the engine rpm sensor from the fastenings on the modular intake manifold.1. Undo the bolt (1a) and remove the engine rpm sensor (1b).

Refitting ( Removing

) Place the engine rpm sensor back in its housing and secure it by tightening the bolt to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	RPM SENSOR	M6	(Crankase side) 0.9

Secure the electrical wiring for the engine rpm sensor to the fastenings on the modular intake manifold. Proceed with the refitting - 1072C44 exhaust manifold heat shield on bulkhead - r+r .Connect the electrical connection for the engine rpm sensor.Connect the battery terminal (-).Remove the car from the ramp.