5530B52 BATTERY DRIP TRAY/SUPPORT - R.R. - Alfa - 147 - eLearn

3025540 - 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

) Proceed with removal - 5530B10 battery - r+r .1. Remove the relay/fuse box cover.2. Undo the nut (2a) and disconnect the earth lead (2b) from the relay-fuse box.

	Name	Connector
2b	Engine compartment junction unit	B1X

1. Turn the relay-fuse box upwards.2. Disconnect the electrical connections (2a), (2b), (2c), (2d) and (2e) from the relay-fuse box.

	Name	Connector
2a	Engine compartment junction unit	B1A

	Name	Connector
2b	Engine compartment junction unit	B1C

	Name	Connector
2c	Engine compartment junction unit	B1E

	Name	Connector
2d	Engine compartment junction unit	B1D

	Name	Connector
2e	Engine compartment junction unit	B1B

1. Release the relay-fuse box from the hinges and remove it.

1. Undo the nut (1a) and disconnect the earth lead (1b) from the battery terminal (-).

	Name	Connector
1b	Battery	A1B

2. Lift up the wiring protection (2a), as necessary, then release the earth lead (2b), disconnected previously, from the relay-fuse box casing.

1. Undo the nut (1a) and remove the relay-fuse box casing (1b).2. Undo the nuts (2a) and remove the relay-fuse box support (2b).

Release the electrical wiring from the fastenings on the battery drip tray.

On the Selespeed version, the electrical connection for the gear selection hydraulic unit must be released from the battery drip tray.

1. Undo the nut fixing the air filter to the battery drip tray.2. Undo the bolts securing the battery cradle to the body.3. Remove the battery cage.

Refitting ( Removing

) Place the battery drip tray back in its housing and secure it to the bodyshell using the bolts.Tighten the nuts fixing the air filter to the battery drip tray.Secure the electrical wiring using the bands on the battery drip tray.Place the relay-fuse box mounting back in its housing and secure it using the nuts.Place the casing for the relay-fuse box back in its housing and secure it using the nut.Place the earth lead in its housing through the opening in the relay-fuse box casing and connect it to the battery terminal (-).Place the relay-fuse box back in its housing and secure it to the hinges.Connect the electrical connections to the relay-fuse box.Rotate the relay-fuse box in its housing.Connect the earth lead to the relay-fuse box.Place the relay/fuse box cover back in its housing.Proceed with refitting - 5530B10 battery - r+r .