3025584 - 5550D18 handbrake on warning light switch - r+r
Removing
(
Refitting
)
- 3380A44 handbrake/linkage protection
- r+r1. Place the handbrake in a lowered position in order to be able
to gain access to the switch fixing bolts. 2. Using a screwdriver, undo the bolt fixing the switch.3. Lift up the handbrake lever.4. Move the switch slightly and disconnect the electrical connection. | Name | Connector |
|---|---|---|
| 5 | Handbrake switch | I40 |
Refitting
(
Removing
)
Check that the switch is not
damaged and, if necessary, conduct an electrical test on it.Connect the electrical connection to the
switch.Position the switch, then lower the handbrake
lever on the actual switch to keep it securely in place.Using a screwdriver, tighten the bolt fixing
the switch.Check the operation of the handbrake warning
light. - 3380A44 handbrake/linkage protection - r+r