3025609 - 5580C12 clock spring for air bag module on steering wheel r r

Removing ( Refitting ) Place the steering wheel in the centred position with the wheels straight. - 7040A26  steering column trim - r+r - 5580C18  air bag module - r+r

Closely observe the safety regulations established for this operation.

 - 4110A11  steering wheel - r+r for replacement or check for versions with air bag1. Undo the bolts.2. Disconnect the electrical connection.

	Name	Connector
2	Clock spring coupling	D47

3. Remove the clock spring.

The clock spring is fitted with a device which automatically stops its rotation when it is removed from the steering wheel. Avoid forcing its rotation.

1. If the clock spring is reused it is advisable to secure the two plates with a band to prevent accidental rotations. Refitting ( Removing ) Check that the wheels are straight.

The parts supplied as spares are for fitting in a centred position.

If, for any reason, the upper plate for the clock spring should rotate in relation to the lower one in such a way that the relative position is no longer known, then the clock spring must be replaced.

Place the clock spring in its housing (if it is being resued, remove the band fitted previously). Reconnect the electrical connections.Tighten the bolts.1. If the clock spring is being replaced with a new one, remove the safety tab.  - 4110A11  steering wheel - r+r for replacement or check for versions with air bag - 5580C18  air bag module - r+r - 7040A26  steering column trim - r+rConnect the battery.Test the operation of the horns.Check the operation of the system using the Examiner or another tester.