3025618 - 5580C86 side bag wiring harness (one) lh or rh - r r or replace
FOLLOW ALL THE RECOMMENDED SAFETY FULES ( See assembly 5580C air bag system ). |
1. Working under the seat, disconnect the retainer (1a) and rotate
the connector holder bracket (1b) in an accessible position. 2. Disconnect the connector from the rail-type retainer3. Disconnect the wiring from the retainer.4. Remove the Side Bag cable loom.
Refitting
(
Removing
)
Check that the wiring is intact
and shows no signs of damage.If a new wiring is being fitted, attach
the labels as described below.1. Detach the removable part (1b) of the adhesive label from the
new wiring (1a). Place a copy of the label (1b) in a specific file
containing the vehicle details (model, registration data, chassis
number) and the serial number of the old backrest cover. This file should
be kept for future checks. 2. Apply the original label (1b) to the inner part at the bottom
of the seat, where there are already the equivalent labels for seat,
side Air Bag module and backrest cover.
Position the wiring on the
frame and secure it using the retaining bands.
In order to prevent any possibility of the wiring being trapped, position it very carefully along the same route as the wiring which has been removed. |
FOLLOW ALL THE RECOMMENDED SAFETY FULES ( See assembly 5580C air bag system ). |