7010D33 CHANNEL OF DOOR DESCENDING GLASS INNER GUIDE (ONE) LH OR RH, OF REAR SIDE DOOR - R R - Alfa - 147 - eLearn

3025717 - 7010D33 channel of door descending glass inner guide (one) lh or rh, of rear side door - r r

) Lower the window completely.If the vehicle is not equipped with a safety device for the windows, proceed as follows.1. Remove the channel from the housing.

If the vehicle is equipped with a safety device for the windows, proceed as follows. - 7010M10 rear side door electrically operated window switch r r - 7010C44 interior handle panel - r r - 7010E11 lh or rh rear door inner panel - r+r with fouling parts removed1. Disconnect the electrical connections.

	Name	Connector
1	Anti-crush sensor in left rear door	K19

	Name	Connector
1	Anti-crush safety sensor on right rear door	K24

2. Remove the channel and sensor from the housing.

Refitting ( Removing

) Check the condition of the channel.With the window completely lowered, fit the channel in the housing.If the vehicle is equipped with a safety device, proceed as follows.Connect the electrical connection - 7010E11 lh or rh rear door inner panel - r+r with fouling parts removed - 7010C44 interior handle panel - r r - 7010M10 rear side door electrically operated window switch r rTest the operation of the sensor by preventing the window from closing completely using and rigid object and checking that the window stops and then opens again.