7040A31 FLAP ASSEMBLY - R R - Alfa - 147 - eLearn

3025801 - 7040A31 flap assembly - r r

) 1. Open the dashboard compartment flap.2. Release the ends of the end of travel rods.3. Undo the bolts fixing the compartment.

1. Move the compartment slightly.2. Release the courtesy light from its housing.3. Disconnect the electrical connections (3a, 3b, 3c).

	Name	Connector
3a	Glove compartment light	G30

	Name	Connector
3b	Glove compartment light	I15A

	Name	Connector
3c	Glove compartment light	I15B

4. Recover the compartment.4. If necessary, release the switch from its housing.

Refitting ( Removing

) Check that the compartment is not damaged.If removed, refit the switch in its housing.Connect the electrical connection.Fit the courtesy light in its housing.Position the compartment.Tighten the compartment fixing bolts.Engage the ends of the end of travel rods, then close the flap checking that it is working properly.