3025851 - 7045A70 front seat support/guide - driver`s side with lift device - r r with seat removed

Removing ( Refitting )  - 7045A44  seat interior guard - r r1. Disconnect the end of the memory control cable. (only for inner guide)
1. Move the guides (1a) forwards by operating the slide control lever (1b).2. Undo the rear guide bolts.
1. Move the guides (1a) backwards by operating the slide control lever (1b).2. Undo the front guide bolts.
1. Withdraw the guides with slide control lever.
The slide control lever must not be disconnected from the guides before dismantling, to avoid deformation which could impair its operation.
Refitting ( Removing ) Check that the guides are not damaged.1. Move inner guide (1a) forward to the end of its travel by hand by means of key (1b)2. Fit the guide.3. Fit the rear bolt without tightening.
1. Move guide (1a) back to the end of its travel by hand by means of key (1b).2. Fit the front bolt without tightening.3. Insert the slide control lever in its seat and engage.
1. Move outer guide (1a) to the end of its travel by hand by means of key (1b).2. Fit outer guide (2a) and engage slide control lever (2b).3. Fit the front bolt without tightening.
1. Move the guides forwards, operating the slide control lever.2. Fit the rear bolt without tightening.3. Tighten the rear bolts.

FasteningComponentØValue(daNm)
-BoltFRONT SEAT GUIDE.M82.4
1. Move the guides backwards, operating the slide control lever.2. Tighten the front bolts.

FasteningComponentØValue(daNm)
-BoltFRONT SEAT GUIDE.M82.4
Move the guides to a suitable position and connect the end of the slide position memory control cable.Test the guides are working properly. In particular, check the guides are aligned by moving them around to different positions using the control lever and then checking the keys of both guides engage simultaneously. Check the slide position memory control is working properly (only for inner guide). - 7045A44  seat interior guard - r r