3025867 - 7045B10 l/h or r/h front seat head restraint - r+r
FOLLOW ALL THE RECOMMENDED SAFETY FULES ( See assembly 5580C air bag system ). |
1. Release the cords from the retainers.2. Insert a hand under the cover and disconnect the side tensioning
hooks.3. Lift the cover as much as possible.4. Disconnect the central flexible retainer and take out from the
front side of the squab.
1. Raise the trim until the head restraint pin retaining tabs can
be disengaged.2. Remove the head restraint.
Refitting
(
Removing
)
Check that the head restraint
is undamaged.Position the head restraint and fit into
its seat. Engage the retaining tabs.Lower the trim.Connect the central elastic to the retainer.Connect the side tensioning hooks.Pull as appropriate and hook the cords
to the retainers.Fully lower the trim and hook the two bottom
ends of the squab cover to each other.Tighten the side shield rear retaining
bolts. - 7045A25 squab lumbar knob - r r - 7045A10 l/h or r/h front seat (one) - r+r