7050A70 LH OR RH DEVICE WITH CABLE (ONE) OF ONE REAR SEAT SQUAB CATCH R R - Alfa - 147 - eLearn

3025886 - 7050A70 lh or rh device with cable (one) of one rear seat squab catch r r

) - 7040B10 load platform (luggage platform) trim - r+r - 7050A18 rear seat squab - r+r (right side). - 7050B10 l/h or r/h head restraint (one) of rear seat - r+r - 7050B30 rear seat central armest r r1. Undo the bolt fixing the mounting ring.2. Remove the mounting ring.3. Release the retaining buttons using the special tool.

	Name	Country
3	Scraper blade	1.823.015.000

4. Undo the bolts (4a) and remove the protection (4b), then retighten bolts (4a).5. Remove the squab protection.6. Unscrew the bolts7. Release the belt slide by undoing the inner retainer using the special tool.

	Name	Country
7	Scraper blade	1.823.015.000

1. Unscrew the bolts2. Remove the seat anchorage bracket.3. Remove the head restraint tubes.4. Remove the armrest embellishment.5. Remove the armrest (5a), disengaging it from the retainers (5b).6. Remove the cover along the entire perimeter of the seat.

1. Working inside the armrest compartment, partly raise trim (1a) and use cutters to cut the hooks (1b) securing the trim to the frame. 2. Remove the cover from the padding.

1. Fold down the squab frame and undo the squab lock pin retaining bolts.2. Move the squab lock pin.

1. Disconnect the transmission cable from the lock retainers.2. Recover the transmission cable with the locking pin.

Refitting ( Removing

) Check that the transmission cable with lock pin is not damaged.Position the transmission cable with lock pin.Connect the transmission cable to the lock retainers.Fit the locking pin in position and fix it using the bolts.Position the trim with padding and stake the hooks securing the trim to the frame.Fit the cover along the whole perimeter.Fit the armrest on the retainers.Fit the armrest panel.Fit the head restraint tubes.Fit the seat anchorage bracket and fix it with the bolts.Position the belt slide and do up the inner retainer. Then secure with bolts.Position the squab protection and fix it with the retaining buttons.1. Undo the side bolts (1a) of the lock, position the protection (1b) then retighten the bolts.NOTE Make sure that the retainers (1c) of the protection (1b) fit correctly in their seatings (1d) in the engagement assembly.

Position the mounting ring and fix it using the bolt. - 7050B30 rear seat central armest r r (only for the right side) - 7050B10 l/h or r/h head restraint (one) of rear seat - r+r - 7050A18 rear seat squab - r+r - 7040B10 load platform (luggage platform) trim - r+r