3025901 - 7055A50 frieze, hinge cover or code (one) - r+r
Removing
(
Refitting
)
1. Slightly heat the lettering to be removed.2. Detach the lettering using a plastic spatula.
Refitting
(
Removing
)
Check that the lettering is
undamaged.Use heptane to clean the area of the bodywork
affected by refitting.1. Apply adhesive tape (1a) to the outer edge of the lettering,
to hold the parts in place, before remvoing the protection (1b)
from the adhesive side of the letters. | This is necessary to keep the letters in the correct position in relation to one another because they are separate from one another. |
