1 - Power steering box2 - Isolating bufferThe steering box has been designed with
over-rated rack and tie-rods, in order to absorb significant stresses,
to limit as much as possible the elastic yields of the steering
line and thus ensure better driving precisionTo avoid the passage of water and dirt and
limit noise in the area in contact with the bodywork, there is an
insulating buffer which, pressed against the panel, acts as a seal.
For connection to the steering wheel, there is a damping joint which
minimizes the vibrations transmitted to the steering wheel.The steering box has a ratio of 68 mm /
revolution, to which correspond 2.2 turns of the steering wheel
for a total 'between kerbs' turning circle of 11.5.
