1008B10 POWER UNIT FRONT MOUNT (TIMING SIDE) FLEXIBLE BLOCK - REPLACE - Alfa - 147 - eLearn

3024755 - 1008B10 power unit front mount (timing side) flexible block - replace

) Position the vehicle on the ramp.Proceed with the removal - 4450B10 Front WHEEL (one) - R.R. (Right side). Proceed with the removal - 7055B54 under-engine guard - r r . Proceed with the removal - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side). Position a hydraulic jack under the engine.1. Undo the bolt securing timing side rigid engine support to the flexible mounting.Lower the hydraulic jack as necessary.2. Undo the bolts (2a) and remove the flexible mounting for the power unit front support (2b).

Refitting ( Removing

) 1. Place the flexible mounting for the power unit front support (1a) back in its housing and secure it by tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	FRONT RUBBER MOUNTS	M8	(Bodyshell side) 3.2 ÷ 3.9

Using the hydraulic jack, place the timing side rigid engine support in contact with the flexible mounting.2. Tighten the bolt securing timing side rigid engine support to the flexible mounting to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	ENGINE MOUNT TIMING SIDE	M12	(Flexible mounting side) 7.9 ÷ 9.7

Remove the hydraulic jack from under the engine.Proceed with the refitting - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side).Proceed with the refitting - 7055B54 under-engine guard - r r .Proceed with the refitting - 4450B10 Front WHEEL (one) - R.R. (Right side).Remove the car from the ramp.