3024741 - 0510C20 lubrication system - check delivery pressure

Let the engine warm up (oil temperature approx. 90° C). Proceed with removal  Refer to op.. 7055B54  under-engine guard - r r .Proceed with removal  Refer to op.. 1072C44  exhaust manifold heat shield on bulkhead - r+r .Proceed with removal  Refer to op.. 1080B40  catalytic pre-converter - r r . Proceed with removal  Refer to op.. 1084A42  engine oil pressure warning light switch - r + r .1. Fit the tool in the seat of the low engine oil pressure switch.

	Name	Country
1	Connector	1.860.969.000

2. Fit the pressure gauge. Proceed with refitting  Refer to op.. 1080B40  catalytic pre-converter - r r . Start the engine only for the time required to check that the engine oil pressure is within the specified values.

	Measurement		Value
-	Engine oil pressure when idling (bar)		1.0 ÷ 1.5

	Measurement		Value
-	Engine oil pressure at 4000 rpm/ (bar)		3.5 ÷ 4.5

Proceed with removal  Refer to op.. 1080B40  catalytic pre-converter - r r . Remove the pressure gauge.Remove the tool.

	Name	Country
-	Connector	1.860.969.000

Proceed with refitting  Refer to op.. 1084A42  engine oil pressure warning light switch - r + r . Proceed with refitting  Refer to op.. 1080B40  catalytic pre-converter - r r .Proceed with refitting  Refer to op.. 1072C44  exhaust manifold heat shield on bulkhead - r+r .Proceed with refitting  Refer to op.. 7055B54  under-engine guard - r r .