1008B30 GEARBOX SIDE MOUNT FLEXIBLE BLOCK - REPLACE - Alfa - 147 - eLearn

3024757 - 1008B30 gearbox side mount flexible block - replace

) Position the vehicle on the ramp.Proceed with the removal - 4450B10 Front WHEEL (one) - R.R. (Left side).Proceed with the removal - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Left side).Proceed with the removal - 7055B54 under-engine guard - r r . Position a hydraulic jack under the gearbox.1. Undo the bolts fixing the power unit gearbox side rigid support to the flexible mounting.Lower the hydraulic jack as necessary.2. Undo the bolts (2a) and remove the gearbox side support flexible mounting (2b).

Refitting ( Removing

) 1. Place the flexible mounting for the gearbox side support (1a) back in its housing and secure it by tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	GEARBOX SIDE RUBBER MOUNT	M8	(Bodyshell side) 3.2 ÷ 3.9

Using the hydraulic jack, place the gearbox side rigid support in contact with the flexible mounting.2. Undo the bolt fixing the gearbox side rigid power unit support to the flexbile block to the specified torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M10	(Flexible mounting side) 4.2 ÷ 5.1

Remove the hydraulic jack from under the gearbox.Proceed with the refitting - 7055B54 under-engine guard - r r .Proceed with the refitting - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Left side).Proceed with the refitting - 4450B10 Front WHEEL (one) - R.R. (Left side).Remove the car from the ramp.