1072D22 AIR FLOW SWITCHING DEVICE CONTROL ACTUATOR - R.R. - Alfa - 147 - eLearn

3024938 - 1072D22 Air flow switching device control ACTUATOR - R.R.

) Ensure that the ignition key is in the OFF postition, then disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1B

Proceed with the removal - 1016A40 ignition coil cover on cylinder head- r+r . Proceed with the removal - 1008C10 power unit upper reaction link r r . Proceed with the removal - 4130B10 power steering fluid resevoir r r . 1. Disconnect the electrical connection from the enablement solenoid of the changeover device actuator.

	Name	Connector
1	Variable geometry control solenoid	L15

2. Disconnect the vacuum intake pipe from the air flow switching device actuator and release it from the fastening.3. Disconnect the linkage for the air flow switching cotrol actuator.

1. Undo the bolts (1a) and remove the air flow switching control actuator (1b).

Refitting ( Removing

) Place the air flow switch control actuator back in its housing.Connect the linkag for the air flow switching control actuator.Connect the air flow switching control actuator vacuum intake pipe and fasten it.Connect the electrical connection from the enablement solenoid of the changeover device actuator.Proceed with the refitting - 4130B10 power steering fluid resevoir r r .Proceed with the refitting - 1008C10 power unit upper reaction link r r .Proceed with the refitting - 1016A40 ignition coil cover on cylinder head- r+r .Connect the battery terminal (-).