3025328 - 4410C12 front suspension anti roll barjoint(end)(one), lh or rh - r r
Removing
(
Refitting
)
Position the vehicle on the
ramp.1. Undo the nuts (1a) and remove the rear suspension anti-roll bar
joint (1b).
Refitting
(
Removing
)
1. Place the front suspension anti-roll bar joints (1a) back in
their housings and fix it tightening nuts (1b) and (1c) to the
recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1b | Nut | FRONT ANTI-ROLL BAR JOINTS | M10 | (Front shock absorber fork side) 4.1 ÷ 5.0 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1c | Nut | FRONT ANTI-ROLL BAR JOINTS | M10 | (Anti-roll bar side) 4.5 ÷ 5.5 |
