3025377 - 4450D10 hub of one rear wheel, l/h or r/h - r+r with wheel removed

Removing ( Refitting ) Position the vehicle on the ramp.Proceed with the removal  - 3310B48  rear brake disc - r r . 1. Undo the bolt (1a) and remove the rear wheel rpm sensor (1b) from its housing.2. Remove the rear wheel hub cover.3. Remove the bevel and undo the rear wheel hub nut.
1. Remove the rear wheel hub (1a) complete with bearing using a suitable commercial extractor (1b).
1. Undo the bolt (1a) and remove the brake disc shield (1b).
1. Remove the bearing outer race (1a), using a suitable commercial extractor (1b).
Refitting ( Removing ) 1. Refit the rear wheel hub (1a) complete with bearing using the tool (1b).

NameCountry
1bTool for Extracting/Fitting1.870.665.000
Place the brake disc shield back in its housing and fix it using the bolt.
Tighten the rear wheel hub nut to the recommended torque.

FasteningComponentØValue(daNm)
-NutHUB WITH BEARING (WITH INSTRUMENTS)M2430.4 ÷ 33.6
1. Bevel the collar of the rear wheel hub retaining nut as illustrated in the diagram using a chisel.
Refit the rear wheel hub cap using the tool.Replace the rear wheel rpm sensor in its housing and fix it using the bolt.Proceed with the refitting  - 3310B48  rear brake disc - r r .Remove the car from the ramp.Proceed with the refitting  - 4450A40  rear wheel geometry - check using optical equipment .