The Body Computer
M1
receives as input the signals coming
from the aerial-receiver
P93
, which is connected to pins
21 and 31 of connector A.
Via the CAN line, the Body Computer
M1
is connected to the controls unit on the door
H44
.
The controls unit on the door
H44
is supplied - pin 24 of connector B - from the line protected by
the fuse F39 of the unit under the dashboard
B2
.
The unit
H44
receives as input the
signal from the release button, located in the controls unit
H12
,
at pin 3 of connector B.
According to the control logic described
above, the unit
H44 sends a command from pin 6 of connector A,
which energizes the boot opening relay J56 which, supplied by the
line protected by shunt fuse B60 , controls the operation of the
boot lock geared motor N57.