3024723 - 0010T40 change manual gearbox oil

Position the vehicle on the ramp. Proceed with removal  Refer to op.. 7055B54  under-engine guard - r r . 1. Remove the filler cap from the gear casing2. Undo the oil drain plug and drain the oil fully into a suitable container.

Do not disperse the oil into the environment, as indiscriminate dispersal of this product causes pollution.

Clean the drain plugs and tighten them to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Drain plug	GEAR CASING PADS	M22	(Differential side) 2.9 ÷ 4.3

Refill the gearbox with the specified oil through the filler hole.

	Type	Component	Name	Qty.
-	Oli [l]	ENGINE LUBRICATION CIRCUIT	TUTELA CAR ZC 75 SYNTH	2.1

The table shows the total quantity of oil present in the gearbox.

Check that the oil level reaches the bottom of the filler hole, then clean the cap and tighten to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Filler plug	GEAR CASING PADS	M22	(Differential side) 2.9 ÷ 4.3

Proceed with refitting  Refer to op.. 7055B54  under-engine guard - r r . Remove the car from the ramps.