1008A46 CAM SHAFT LEFT RIGID MOUNT - R R - Alfa - 147 - eLearn

3024753 - 1008A46 cam shaft left rigid mount - r r

) Position the vehicle on the ramp.Proceed with the removal - 4450B10 Front WHEEL (one) - R.R. (Right side). Proceed with the removal - 7055B54 under-engine guard - r r . Proceed with the removal - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side). Position a hydraulic jack under the engine.1. Undo the bolt securing the timing side rigid engine support to the flexible mounting.2. Undo the bolts (2a) and remove the timing side rigid engine support (2b).

Refitting ( Removing

) 1. Place the timing side rigid engine support (1a) back in its housing and secure it to the cylinder block/crankcase by tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	ENGINE MOUNT TIMING SIDE	M10	(Crankcase side) 4.5 ÷ 5.5

2. Tighten the bolt securing timing side rigid engine support to the flexible mounting to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	ENGINE MOUNT TIMING SIDE	M12	(Flexible mounting side) 7.9 ÷ 9.7

Remove the hydraulic jack from under the engine.Proceed with the refitting - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side).Proceed with the refitting - 7055B54 under-engine guard - r r .Proceed with the refitting - 4450B10 Front WHEEL (one) - R.R. (Right side).Remove the car from the ramp.