1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R + R - Alfa - 147 - eLearn

3024836 - 1056B60 single fuel manifold pipe, with injectors - r + r

) Ensure that the ignition key is in the OFF postition, then disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1B

Proceed with the removal - 1016A40 ignition coil cover on cylinder head- r+r . Discharge the fuel supply pressure with the tool connected to the specific valve located on the side of the fuel manifold pipe.

	Name	Country
-	Rapid connector	1.870.684.000

1. Disconnect the electrical connections from the injectors.

	Name	Connector
1	Injector	N70

2. Disconnect the electrical connection from the variable valve timing electro-magnet.

	Name	Connector
2	Timing variator actuator	N76

3. Disconnect the rapid attachment of the fuel supply front pipe, fuel manifold pipe side.4. Release the front fuel supply pipe from the fastening on the modular inlet manifold.

1. Undo the bolts (1a) and remove the single fuel manifold pipe (1b), complete with injectors (1c).

Refitting ( Removing

) Place the single fuel manifold pipe, complete with injectors, back in its housing. Take care to fit the injectors in their housings by pressing with both hands.Tighten the two bolts fixing the single fuel manifold pipe.Fix the front fuel supply pipe to the fastening on the modular inlet manifold.Connect the rapid attachment for the front fuel supply pipe, fuel manifold pipe side.Connect the electrical connection to the variable valve timing electro-magnet.Connect the electrical connections to the injectors.Proceed with the refitting - 1016A40 ignition coil cover on cylinder head- r+r .Connect the battery terminal (-).