1072B10 INLET MANIFOLD - R + R AND REPLACE SEAL - Alfa - 147 - eLearn

) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF postition, then disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1B

Proceed with the removal - 7055B54 under-engine guard - r r . Proceed with the removal - 1016A40 ignition coil cover on cylinder head- r+r . Proceed with the removal - 1056B60 single fuel manifold pipe, with injectors - r + r . Proceed with the removal - 1072D10 modular inlet manifold - r+r . 1. Undo the bolts (1a) and remove the bracket (1b) connecting the intake manifold to the bracket on the engine for the reaction rod.

1. Undo the nuts (1a) and remove the inlet manifold (1b).Remove the gasket.

) Place the inlet manifold, complete with a new gasket, back in its housing and fix it tightening the nuts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	INLET MANIFOLD	M8	(Cylinder head side) 2.3 ÷ 2.8

Place the bracket connecting the intake manifold to the bracket on the engine for the reaction rod back in its housing and secure it using the bolts.Proceed with the refitting - 1072D10 modular inlet manifold - r+r .Proceed with the refitting - 1056B60 single fuel manifold pipe, with injectors - r + r .Proceed with the refitting - 1016A40 ignition coil cover on cylinder head- r+r .Proceed with the refitting - 7055B54 under-engine guard - r r .Connect the battery terminal (-).Remove the car from the ramp.