1080B60 LAMBDA SENSOR - R.R. - Alfa - 147 - eLearn

3024874 - 1080B60 LAMBDA SENSOR - R.R.

) Position the vehicle on the ramp.Make sure that the ignition key is in the OFF position, then disconnect the negative (-) battery terminal.

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connection for the Lambda sensor.

	Name	Connector
1	Lambda sensor downstream of post-catalyzer	K17

1. Release the electrical wiring for the Lambda sensor from the fastenings.2. Undo and remove the Lambda sensor complete with electrical wiring.

Refitting ( Removing

) Place the Lambda sensor back in its housing and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	LAMBDA PROBE	M18	4.1 ÷ 5.0

Secure the electrical wiring for the Lambda sensor to the fastenings.Connect the electrical connection for the Lambda sensor.Connect the battery terminal (-).Remove the car from the ramp.