1088C14 WATER PUMP - R + R WITH DRIVE BELT REMOVED - Alfa - 147 - eLearn

3024906 - 1088C14 water pump - r + r with drive belt removed

Removing ( Refitting

) 1. Disconnect the lower coolant outlet hose from the radiator and drain the engine coolant.

Manually press the springs and remove the rapid attachment for the hose.

Collect the coolant in a suitable container.

1. Undo the bolts (1a) of the inlet side drive pulley, using the tool (1b) for counter-torque.

	Name	Country
1b	Counter-torque	1.822.155.000

2. Remove the inlet side driven pulley.

1. Undo the bolts (1a) and remove the water pump (1b) complete with O-Ring (1c).

Refitting ( Removing

) 1. Place the water pump (1a), complete with O-Ring, back in its housing and secure it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	COOLANT PUMP	M8	(Cylinder head side) 2.3 ÷ 2.8

Fit the inlet side driven pulley and fix it using the bolts without tightening them.Connect the lower coolant outlet hose from the radiator.Refill the engine cooling system with coolant - 0010T20 coolant change .