3024911 - 1088D24 rigid pipe for coolant inlet to water pump - r + r

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF postition, then disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1B

Drain the air conditioner refrigerant system  - 5040A10  Air conditioning refrigerant CIRCUIT - Draining and Refilling .Proceed with the removal  - 4450B10  Front WHEEL (one) - R.R. (Right side). Proceed with the removal  - 7055B54  under-engine guard - r r . Proceed with the removal  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side). Proceed with the removal  - 1072C44  exhaust manifold heat shield on bulkhead - r+r . Proceed with the removal  - 1080B40  catalytic pre-converter - r r . Proceed with the removal  - 1092G10  single engine belt r r . Proceed with the removal  - 5040A20  air conditioner compressor - r+r - includes fluid level check and top up if necessary . Proceed with the removal  - 5040A26  compressor mount - r r . Proceed with the removal  - 1072C12  exhaust manifold - r r . 1. Release and remove the engine oil dipstick.2. Undo the nut (2a) and remove the engine oil dipstick pipe (2b). 1. Undo the bolt (1a) and the nut (1b) and remove the wter pump rigid inlet pipe mounting bracket (1c).2. Remove the exhaust manifold gasket. 1. Disconnect the lower radiator coolant outlet hose from the water pump rigid inlet pipe.

Recover the coolant which comes out in a suitable container.

2. Disconnect the coolant return pipe from the climate control heater, water pump rigid inlet pipe side.3. Undo the bolt fixing the rigid supply pipe to the engine oil heat exchanger. 1. Undo the connector (1a) and disconnect the coolant outlet pipe from the engine oil heat exchanger (1b), water pump rigid inlet pipe side. 2. Disconnect the engine coolant system supply pipe from the water pump rigid inlet pipe. 1. Undo the bolts (1a) and remove the water pump rigid inlet pipe (1b).Remove the gasket. Refitting ( Removing ) Place the water pump rigid inlet pipe, complete with gasket, back in its housing and secure it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	COOLANT PUMP RIGID INLET PIPE	M6	(Cylinder head side) 0.8 ÷ 1.1

Connect the system supply pipe to the water pump rigid inlet pipe.Connect the coolant outlet pipe from the engine oil heat exchanger to the water pump rigid inlet pipe and tighten the connector.Tighten the bolt fixing the rigid supply pipe to the engine oil heat exchanger.Connect the coolant return hose from the climate control heater on the side of the rigid inlet pipe to the water pump.Connect the lower radiator coolant outlet hose to the water pump rigid inlet pipe.Place a new exhaust manifold gasket in the housing.Place the bracket fastening the water pump rigid coolant inlet pipe back in its housing and fasten it using the nut and the bolt.Place the complete engine oil dipstick tube back in its housing and fix it using the bolt.Place the engine oil dipstick back in its seating.Proceed with the refitting  - 1072C12  exhaust manifold - r r .Proceed with the refitting  - 5040A26  compressor mount - r r .Proceed with the refitting  - 5040A20  air conditioner compressor - r+r - includes fluid level check and top up if necessary .Proceed with the refitting  - 1092G10  single engine belt r r .Proceed with the refitting  - 1080B40  catalytic pre-converter - r r .Proceed with the refitting  - 1072C44  exhaust manifold heat shield on bulkhead - r+r .Proceed with the refitting  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side).Proceed with the refitting  - 7055B54  under-engine guard - r r .Proceed with the refitting  - 4450B10  Front WHEEL (one) - R.R. (Right side).Refill the air conditioner refrigerant system  - 5040A10  Air conditioning refrigerant CIRCUIT - Draining and Refilling .Connect the battery terminal (-).Refill the engine cooling system with coolant  - 0010T20  coolant change .Remove the car from the ramp.