3024932 - 1020E20 front oil seal of one counter-rotating shaft, l or r - r + r

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

NameConnector
-Battery  A1B 
Proceed with the removal  - 4450B10  Front WHEEL (one) - R.R. (Right side).Proceed with removal  - 7055B54  under-engine guard - r r .Proceed with the removal  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side).Proceed with removal  - 1092G10  single engine belt r r .Proceed with removal  - 1092A10  Crankshaft services PULLEY - R.R. .Proceed with removal  - 1092G20  engine component single belt fixed tensioner - one - r + r .Proceed with removal  - 1092G14  engine component single belt mobile tensioner - r + r .Proceed with removal  - 1032D12  timing system protective cover(s) - r + r .Proceed with removal  - 1092E10  counter-rotating shaft drive toothed belt - r + r .Proceed with removal  - 1092E24  counter-rotating shaft pulley - r + r with toothed belt removed .1. Release and remove the counter-balance shaft front oil seal.
Take care not to damage the oil seal seat during removal.
Refitting ( Removing ) 1. Place a new counter-balance shaft oil seal (1a) back in the housing in the oil cover on the side concerned using the tool (1b).

NameCountry
1bFitting tool1.821.251.000
Proceed with refitting  - 1092E24  counter-rotating shaft pulley - r + r with toothed belt removed .Proceed with refitting  - 1092E10  counter-rotating shaft drive toothed belt - r + r .Proceed with refitting  - 1032D12  timing system protective cover(s) - r + r .Proceed with refitting  - 1092G14  engine component single belt mobile tensioner - r + r .Proceed with refitting  - 1092G20  engine component single belt fixed tensioner - one - r + r .Proceed with refitting  - 1092A10  Crankshaft services PULLEY - R.R. .Proceed with refitting  - 1092G10  single engine belt r r .Proceed with the refitting  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right side).Proceed with refitting  - 7055B54  under-engine guard - r r .Proceed with the refitting  - 4450B10  Front WHEEL (one) - R.R. (Right side).Connect the negative (-) battery terminal.Remove the car from the ramps.