3025232 - 3330C37 pipe from brake fluid reservoir to master cylinder (pump) - r r for rhd versions
Removing ( Refitting ) - 1016A40 ignition coil cover on cylinder head- r+r - 1008C10 power unit upper reaction link r r - 4130B10 power steering fluid resevoir r r - 1072D22 Air flow switching device control ACTUATOR - R.R. (2.0 engine)1. Undo the brake fluid reservoir cap.2. Using a syringe, drain the brake fluid from the reservoir.
1. Undo the bolts securing the brake fluid reservoir. 2. Lower the reservoir as far as possible so that the fluid in the
pipes flows out, then draw off the brake fluid in the reservoir
using a syringe. 3. Disconnect the pipe to be removed from the reservoir and use
a cloth to collect any brake fluid emerging.
1. Disconnect the pipe (1b) to be removed from the master cylinder
and use a cloth to collect any brake fluid emerging. 2. Open bands (2a) and remove pipe (2b) to be removed.
Refitting
(
Removing
)
Check that the pipe from brake fluid reservior
to master cylinder are undamaged.Position the pipe and fasten it using the
bands.Fit the pipe to the master cylinder.Connect the pipe to the reservoir.Refit the brake fluid reservoir and secure
with bolts. - 1072D22 Air flow switching device control ACTUATOR - R.R. (2.0
engine) - 4130B10 power steering fluid resevoir r r - 1008C10 power unit upper reaction link r r - 1016A40 ignition coil cover on cylinder head- r+r - 3330A14 HYDRAULIC BRAKING SYSTEM - Bleed air