3025261 - 3340B62 rear connection central pipe - r r
Removing
(
Refitting
)
Position the vehicle on the ramp.Proceed with removal - 5530B10 battery - r+r .Proceed with removal - 5530B52 Battery DRIP TRAY/SUPPORT
- R.R. .Proceed with removal - 3340A12 A'B.S. system. - electronic
and hydraulic CONTROL UNIT R.R. .Proceed with removal - 3340A13 abs central mount - r
r .Proceed with removal - 4450B10 Front WHEEL (one) -
R.R. (Left side).Proceed with removal - 7055B64 Engine compartment DUST
shield in front wheel arch (one), left or right - R.R. .Release the rigid pipe from the hydraulic
control unit to the rear brake pipe connector from the fastenings
on the engine bulkhead.1. Remove the brake pipe protection.2. Undo the connector (2a) and remove the rigid pipe from the hydraulic
unit to the connector on the pipes to the rear brakes (2b), releasing
it from its attachments. 
Refitting
(
Removing
)
Refit in its seating the rigid pipe from
the hydraulic unit to the connector on the pipes to the rear brakes, and
secure it to the underbody. Tighten the connector on the rigid pipe
from the hydraulic unit to the connector on the pipes to the rear brakes,
connector side, to the recommended torque.  | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Connector | RIGID BRAKING PIPE-CONT.UNIT/REAR BRAKES | M10 | (Intermediate connector side) 1.3 ÷ 1.5 |